Boat Blinds Measuring Diagrams

The following information is required to assure the proper fit of the boat blind.
Please double check measurements prior to submitting.

Measuring 18" forward of the back of the transom. Lay a flat edge across the boat.

From the straight edge to the back of your motor - What is the length of "A" _________ inches.

Measuring from the outside corner to the middle of the back of the motor - What is the length of "B" _________ inches.

Note: (for blinds to be used on boats without motors, ignore above instructions).

Name _______________________________________________

Address ___________________________________________

City _____________________ State _____________ Zip _____________

Phone ____________________ Email ____________________

Make of Boat ______________________ Model of Boat ______________________

Motor Make ________________________ HP ______________ Year ______________

What is the total length of your boat (to the nearest inch)?

Ft. ___________ In.___________
What is the width of the rear of your boat? _______________Inches
If your Jon Boat has a V Bow, please fill in the dimensions C and D to the nearest fraction of an inch on the diagram below.
If you have a square front jon boat, what is the outside width measurement of the front of your boat_______________Inches

Measuring from the rear of your boat

Width 1 Ft. forward _______ in.

Width 2 Ft. forward _______ in.

Width 3 Ft. forward _______ in.

Width 4 Ft. forward _______ in.

Width 5 Ft. forward _______ in.

Width 6 Ft. forward _______ in.

Width 7 Ft. forward _______ in.

Width 8 Ft. forward _______ in.

Width 9 Ft. forward _______ in.

Width 10 Ft. forward _______ in.

Width 11 Ft. forward _______ in.

Width 12 Ft. forward _______ in.

Width 13 Ft. forward _______ in.

Width 14 Ft. forward _______ in.

Width 15 Ft. forward _______ in.

Width 16 Ft. forward _______ in.

Width 17 Ft. forward _______ in.

Width 18 Ft. forward _______ in.

Width 19 Ft. forward _______ in.

Width 20 Ft. forward _______ in.

Please place the measurements, in inches, into the diagrams below.

Diagram 2

(a) Distance from rear of boat to rear of back seat.

(b) Width of back seat.

(c) Distance from back of boat to center of any other existing seating arrangement for window placement. Additional places for measurements are in the diagram, c2, etc. If not specified, windows will be averaged out in the length of cabin.

(d) Distance from back of boat to start of front deck if one exists.

Diagram 3

(e) Distance from top of seat to top of gunnel.

(f) Distance from top of seat to floor.

Diagram 3

(g) Width of gunnel. (Example: 1-1/2" up to 6")